Window Weld Mounts (DIY)

DIY UNDER CREATION - DO NOT ATTEMPT UNTIL THIS IS FINISHED OR DO SO AT YOUR OWN RISK

  1. Drill out mount where fluid is contained in the mount.

    telegram-cloud-photo-size-1-5080305751611780385-y.jpg


  2. Use a syringe to inject 3M Window Weld
  3. Let cure for 24-48 hours.

    Failure to let it cure will likely result in part failure.

  4. Re-install

Revision #10
Created 17 February 2024 01:36:05 by Akakios
Updated 6 June 2024 03:27:37 by Akakios