VCDS-09-Cent. Elect.
- Adjust LED Brightness
- Keep LED DRL's on With Turn Signal
- Coming Home Lights
- Enabling Independent Control of Fog Lights with High Beams
- Curb Lighting
Adjust LED Brightness
[09 – Cent. Elect.] [Security Access - 16] (enter security code. One of the default codes is- 20113)
[Adaptation - 10] -> Channel 3
Set between 5 and 100
Keep LED DRL's on With Turn Signal
Disable DRL dim on turn signal
[Select]
[09 - Central Elec.]
[Security Access - 16]
Code: 20113
[Adaption - 10]
Channel 3
Set between 5 and 100
[Do It!]
(I found 50 to be a good setting)
Coming Home Lights
Leaves the low beams off when unlocking the car and just have the DRLs on when it’s dark outside, similar to some other Audis. Much cleaner look.
[Select]
[09 Central electric]
[Coding - 07]
[Long coding helper]
Click on byte 6 and disable bit 4
Enabling Independent Control of Fog Lights with High Beams
- [09 – Cent. Elect.]
- [Coding - 07]
- Long Coding Helper -> Byte 4
- Bit 1 – (Front) Uncheck the box or change :Bit 1 to 0
- Bit 2 – (Rear) Uncheck the box or change :Bit 2 to 0
Curb Lighting
Illuminating the Curb when turning hard left or right at low speeds with dipped beam on, by turning on the all-weather light on the relevant side of the car.
- [Select]
- [09-Cent. Elect.]
- [Coding - 07]
- [Long Coding Helper]
- Click on byte 4 and enable bit 0
- [Do It!]