Search Results

Part Availability: TGK Motorsports Tools Needed:· 16mm Wrench· Another 16mm Wrench· 3” Extension· 12” Extension· 6mm Allen Key· 13mm Socket· 16mm Socket· 10mm Triple Square· Swivel Socket Adapter· Torque Wrench· Lift, Ramps, or Jackstands *Sway bars in the p...

Part Available: TGK Motorsports AN Coolant Line Upgrade Kit Remove Headlight Plastic CoversFor the S7, remove any plastic covers around the headlights to access the radiator area. This step does not apply to the S6. Remove Radiator CoverDetach the radiator...

Tools Required 10mm  12mm  13mm  Cutters for airline Remove Spare from car Remove foam cover on top of battery  Remove two bolts holding the tank to the car (10mm) Remove airline from tank 12mm (Bleed airline slowly its under 250psi ...

DIY UNDER CREATION - DO NOT ATTEMPT UNTIL THIS IS FINISHED OR DO SO AT YOUR OWN RISK Drill out mount where fluid is contained in the mount. Use a syringe to inject 3M Window Weld Let cure for 24-48 hours. Failure to let it cure will likely result in ...

The TGK Motorsport intake is available at: TGK Motorsport Audi 4.0T Air Intake System There is also a secondary model that includes an adapter to utilize the stock air box, eliminating the annoying accordion hoses and giving you bigger inlets in the proces...

ECS Tuning offers two versions of it's intake, one with the carbon fiber lid and one without.  The standard Luft-Technik kit does not have the ability to retrofit the carbon fiber air box lid from the Kohlefaser style kit. The Kohlefaser Luft-Technik Intake ...

Original Post: Audizine Original Part Link: SRM Remove the engine cover. Now remove the hose clamps and take these tubes out. Now press on these tabs and disconnect the ram air inlet from the factory airbox. Lift the airbox out (it's not bolted in, it's...

YouTube - Jacking Up S6/S7

Product Link: bTres Sync your bTres by sending your tuner your bTres code. Your tuner will tell you what parameters to activate for logging files being sent direct to them.

Original by GilliamOS Upgrading to a Solid State Drive (SSD) in your car's Multimedia Interface (MMI) is not only feasible but also offers a stable and moderately easy solution, despite being somewhat time-consuming. This guide will briefly cover the DIY pro...

Original Post: WhiteWhiteS7 Introduction Owners of 2013 Audi S6/S7 cars, especially those just outside the warranty period, often encounter issues with the oil separator. This guide is designed to help address this common problem, as described in TSB 20406...

Analysis by: Daniel Bui Test Setup:2014 S6TS1 - 30psiTS wastegatesInlets and intakes Upgraded HXUpgraded IC Brick & OEME404 bar map sensors CWA 100 feeding CWA 150Dual LPFPHPFP UpgradesDPsAWE Exhaust custom tuning No WMI during these runs Last year and this ...

[09 – Cent. Elect.] [Security Access - 16] (enter security code. One of the default codes is- 20113)[Adaptation - 10] -> Channel 3Set between 5 and 100

Disable DRL dim on turn signal[Select][09 - Central Elec.][Security Access - 16]Code: 20113[Adaption - 10]Channel 3Set between 5 and 100[Do It!](I found 50 to be a good setting)

[13 - Auto Distance Regulation][Adaptation - 10]Select channel 1BFind "Distance basic setting option"Change from OFF to ON

46-Central ConvenienceSecurity Access 16017Adaptation channels 207 & 208 for rear side markersDocument your existing numbers in case you want to re-enable later onChange existing numbers to 0 & 32Save

Leaves the low beams off when unlocking the car and just have the DRLs on when it’s dark outside, similar to some other Audis. Much cleaner look. [Select] [09 Central electric] [Coding - 07] [Long coding helper] Click on byte 6 and disable bit 4

Module 46 Adaption, enter channel 98 Change 1 to 0 Part Two Module 46 Coding, long coding helper Byte 15, 00001111 Save exit and done My byte 15 was showing 00000000 originally Added the 4 1’s, saved, coding accepted, power off car and restart. ...

[09 – Cent. Elect.] [Coding - 07] Long Coding Helper -> Byte 4  Bit 1 – (Front) Uncheck the box or change :Bit 1 to 0  Bit 2 – (Rear) Uncheck the box or change :Bit 2 to 0

Illuminating the Curb when turning hard left or right at low speeds with dipped beam on, by turning on the all-weather light on the relevant side of the car. [Select] [09-Cent. Elect.] [Coding - 07] [Long Coding Helper] Click on byte 4 and enable bit 0 ...