Search Results

Product Link: bTres

Original by GilliamOS Upgrading to a Solid State Drive (SSD) in your car's Multimedia Interface (MMI) is not only feasible but also offers a stable and moderately easy solution, despite being somewhat time-consuming. This guide will briefly cover the DIY pro...

No need to run wires all the way to the ABS unit from the center console. All 4GX comes with this wiring factory installed. Nevertheless, note that this was done to 1AT PR code ABS module. If you have 1AS ABS module, it may still work, but it may stress your A...

If you're looking for a location to use a switched fuse on the S6/S7, look below: Switched Location: Panel B, ST1 Or top portion of Panel B, ST3 This entire row is switched. Unswitched Location:

YouTube - Jacking Up S6/S7

In order to properly use jack stands on the C7 S6/S7 at home, you'll need to use another location on the car in order to free up the jack points. We've recorded a video for you to watch:

Credit: Original by FE_Performance, Edits by AudiS7Reviews After Every Transmission flash: Transmission temperature MUST be 50-60 C The engine must be running, and you have to have your foot on the brake firmly. Do not use OBD11 Open VCDS  Select 02-Au...

Preparation Warm Up Transmission: Start the car and let it idle for about 10-15 minutes to warm up the transmission. The temperature should be between 40-50 degrees Celsius. Connect VCDS: Plug in the VCDS interface to your car's OBD-II port and start the V...

Credit: AudiC7OwnersEdits By: C7Wiki Signs of Failure: You get code P2753. You smell a faint coolant odor near the driver's side door, but don't see any leaks anywhere. You see small puddles of coolant under the car on the driver's side, right under your...

Ensure there are no current sport diff errors/codes before proceeding! Go into the Instruments Module - Coding - and uncheck "Sport Differential Installed". Turn off the car, then turn it back on and verify that there are no dash errors. If there are no er...

Product Page: JH Motorsports

The TGK Motorsport intake is available at: TGK Motorsport Audi 4.0T Air Intake System There is also a secondary model that includes an adapter to utilize the stock air box, eliminating the annoying accordion hoses and giving you bigger inlets in the proces...

ECS Tuning offers two versions of it's intake, one with the carbon fiber lid and one without.  The standard Luft-Technik kit does not have the ability to retrofit the carbon fiber air box lid from the Kohlefaser style kit. The Kohlefaser Luft-Technik Intake ...

034 recently released an intake with a dual filter and a carbon fiber heat shield This intake utilizes the stock inlets. If you have upgraded inlets, this may not fit until fitment has been confirmed by someone. The 034 Intake can be found at: S34 Carbon Fi...

The CTS Intake is available at: CTS-IT-938 - CTS Turbo Dual 3" Intake Kit

The Revo Intake is available at Revo 4.0T Air Intake System

Original Post: Audizine Original Part Link: SRM Remove the engine cover. Now remove the hose clamps and take these tubes out. Now press on these tabs and disconnect the ram air inlet from the factory airbox. Lift the airbox out (it's not bolted in, it's...

The ARP Ignition Coil Pack upgrade kit is available at: APR Performance Ignition Service Kit

Original by BHVRDR I have finally gotten around to writing on this topic after people have shown interest. I want to thank Tecomotive.com for making the specifications of these pumps so readily available. The data they provide is available from Pierburg, but ...