Coolant AN Line Upgrade

Part Available:   TGK Motorsports 

1. Remove OEM fittings (pull up on tab wire), then pull straight out.

2. Once OEM lines are removed, disassembletake apart the new fittings.fittings Pushand push the new new-collar portion down on the tabs,tabs. and then thread the insert into the collar to lock the fitting into the tank. 

4. Remove the OEMoem lines from the radiator. This THIS will createmake a mess due tofrom coolant spillage,and height so ensuremake yousure to have a rag or something to collect the drippingdropping coolant.

5. The front coolantCoolant line consists ofis the 45 degree and 90 degreeDegree line.Line. Do not follow the OEM routing for this line.  Route the line around the front of the motor and through the center of the core support to the radiator.

5. The lineLine coming from the side of the bottle attaches to the coolant crossover line on the passenger side of the motor. Use the barb fitting and attach it to the rubber hose on the coolant crossover line. The easiestEasiest method we found was to remove the rubber hose entirely from the car,car and attach the barb/fitting toon the rubber hose, and then reattach that to the crossover line.