Sport Differential Removal Guide

1. With no errors present, go into the Instruments Module - Coding - uncheck "Sport Differential Installed".
   
   
2. Turn off the car, then turn it back on and verify there are no dash errors. If there are no errors, proceed to the next step.
   
   
3. Go into the CANBUS Module - Gateway List - and remove AWD.
   
   
4. Restart the car. If there are no dash errors, continue to the next step.
   
   
5. Go to the rear of the car and remove the fuse for the Sport Differential (fuse location may vary depending on your vehicle, so check the fuse diagrams). Verify that no errors appear on the dash. If there are no errors, you're good to proceed with removing the differential wiring and/or the differential itself.
   
   
6. DO NOT remove the AWD module or unplug it!