Sport Differential Removal Guide

Ensure there are no current sport diff errors/codes before proceeding!

1. Go into the Instruments Module - Coding - and uncheck "Sport Differential Installed".
   
   
2. Turn off the car, then turn it back on and verify that there are no dash errors. If there are no errors, proceed to the next step.
   
   
3. Go into the CANBUS Module - Gateway List - and remove AWD.
   
   
4. Restart the car. If there are no dash errors, continue to the next step.
   
   
5. Go to the rear of the car and remove the fuse for the Sport Differential (fuse location may vary depending on your vehicle, so check the fuse diagrams). Verify that no errors appear on the dash. If there are no errors, you’re ready to remove the differential wiring and/or the differential itself.
   

DO NOT remove the AWD module or unplug it!

Original Content: TGK Motorsport
Revisions by: Deutsche Auto Garage